BM-1000-PM1K ProSoft Technology Modbus RS485 I/O System

The Modbus RS485 I/O System provides an easy and cost-effective way to connect local digital and analog devices to any Modbus master, such as SCADA systems or PLCs. This system requires no configuration or network mapping, as each I/O module appears as a slave device on the Modbus network with a pre-configured data map. I/O modules are conveniently powered from the RS485 I/O Expansion module via the DIN rail mounted DataRail backplane. Up to 16 I/O modules can be added to one Modbus network, making it easy to add the devices you need. The system can also be used in conjunction with ProSoft Frequency Hopping radios for remote applications.

Features and Benefits
-Easy to use: No software configuration required.
- Easy to install: Mounts onto a 35 mm DIN rail without any tools.
-Isolated: Each I/O Module provides field isolated inputs and outputs.
- Scalable: Modbus RS485 I/O Module supports a multitude of I/O Modules. See specs for details.
-Less wire clutter: Single power termination.
-Flexible: the same I/O Modules can be utilized for wireless applications with Wireless I/O Radio Kit.
-Works with Any RS485 Modbus Master / standalone system.
-Customize I/O using Digital, 0-10 V, and/or 4-20 mA options.
-24-bit high-resolution Analog inputs.
-Wiring label on each device for quick reference.

• Specifications
• Unique Features - Works with any Modbus RS485 master device No software configuration required Single point power termination
• Maximum Network Capacity - Max capacity depends on I/O combination use Power Budget Calculator http://psft.com/A7T
• I/O Module Slave ID Selection - 16-Position rotary switch (+1 for Modbus slave ID)
• DIN Rail Mounting Compatibility - 35 mm x 7.5 mm DIN rail
• DataRail™ (Included w/ Kit) - 6.1 in / 156 mm - Supports up to Exp. +5x I/O modules. Other lengths also available.
• Auto-Detection of Modules - Yes, via DataRail at power-up
• DataRail Mounting Hardware - 4-Claw attachment to 35 mm DIN rail with end terminal bracket
• Built-In Mounting Hardware - Spring-loaded clip-on system
• Wire Gauge - Solid / stranded (AWG) 28-12 gauge
• Wire Rating - UL: 300 V RMS, 80 °C and 300 V, 105 °C CSA: 300 V RMS, 105 °C
• Warranty - 2-Year limited