BM-xx00-RM1K ProSoft Technology Wireless I/O Radio Kit

How many times do you need to get a few points of digital or analog inputs and outputs from point A to point B, but can’t justify the cost of running the wires? The Radio Kit is a replacement for hardwired I/O that is simple to deploy. The Kit requires no programming – just wire strippers and a screwdriver. There is no communication protocol to interpret.

The radios are paired and secured at the factory, so there are no settings or configurations to figure out. It is bi-directional, so digital and analog signals can be sent in both directions between two connected I/O stations. Inputs on one module are simply replicated as outputs on the corresponding module. Our wireless I/O makes use of the unlicensed ISM band at either 868 MHz, 900 MHz, or 2.4 GHz (USA only). The radios can send I/O up to 4 miles for the 900 MHz or 1 mile for the 868 MHz and 2.4 GHz models. Each radio pair can connect up to 16 I/O modules, more than enough for most applications.

Features and Benefits
-Save time and money: Eliminates trenching and running conduit / deploys in minutes
-Easy to use: No software configuration needed
-Easy to install: Mounts onto a 35 mm DIN rail without any tools
-Scalable: Supports a multitude of I/O modules per system. See specs for details.
-Secure: Factory paired, secure radio system keeps network protected from intrusions
-Failsafe: User can defines how outputs are failed over when RF or I/O communication is ever lost
-Reduced wiring: Single power termination per station
-863 to 870 MHz, 902 to 928 MHz, or 2.4 GHz License-Free ISM Band Frequency
-128-bit AES RF security
- Controlled local shutdown (ESD) via provided dry contact input

• Specifications
• Maximum Network Capacity² - Max capacity depends on I/O combination, Power budget calculator: http://psft.com/A5D
• DIN Rail Mounting Compatibility - 35 mm x 7.5 mm DIN Rail
• DataRail™ (Included with Radio Kit) - 6.1 in / 156 mm - Supports up five (5) I/O modules, other lengths also available
• DataRail Mounting Hardware - 4-Claw attachment to 35 mm DIN Rail with end bracket
• Built-In Mounting Hardware - Spring-loaded clip-on system
• Wire Gauge - Solid / Stranded (AWG) 28-12 gauge
• Wire Rating - UL: 300 V RMS, 80 °C and 300 V, 105 °C, CSA: 300 V RMS, 105 °C
• Warranty - 2-Year limited