BR-xxxx-RM4 ProSoft Technology Wireless I/O Radio Kit Onboard I/O

The WIO® Radio Module Kit with Onboard I/O is the quickest and simplest method for replicating process signals without the hassle of digging trenches, running conduit, and wiring. Both Radio Modules A and B are equipped with two configurable digital channels so that you can run digital signals in both directions and in any combination. Radio A is equipped with two analog 4-20 mA inputs that correspond to the two analog 4-20mA outputs on Radio B.

Features and Benefits
-SIMPLE RADIO AND I/O COMBO-IN-ONE The WIO® Radio Module Kit with Onboard I/O is the quickest and simplest method for replicating process signals without the hassle of digging trenches, running conduit, and wiring. Both Radio Modules A and B are equipped with two configurable digital channels so that you can run digital signals in both directions and in any combination. Radio A is equipped with two analog 4-20 mA inputs that correspond to the two analog 4-20mA outputs on Radio B.
-READY OUT-OF-THE-BOX The secure point-to-point wireless I/O system is factory paired and requires zero software programming. The system is configured using only the DIP switches on each module. These modules mount on any 35 mm DIN rail with no additional mounting hardware required - just need wire and a screwdriver.
-FAIL-SAFE PROTECTION Fail-safe output options let you determine what values the outputs will go to in the event of RF signal loss. Digital signals can fail to ‘on’ or ‘off’ states. For analog signals, you can select last known value, 4 mA or 20 mA. All fail-safe modes are configured using DIP switches.

• Specifications
• Analog 4-20 mA Communication - 2 x Uni-Directional (Radio A to B)
• Digital/Discrete Communication - 2 x Bi-Directional (DIP Switches)
• DIO Mismatch Indication - Right LED Green: OK
• Red: Mismatch
• DIN Rail Mounting Compatibility - 35 mm Standard DIN Rail (Direct Mount)
• Built-In Mounting Hardware - Spring-Loaded Clip-On System
• Wire Gauge - Solid / Stranded (AWG) 28-12 Gauge
• Wire Rating (Recommended) - 300 V RMS, 80 °C and 300 V, 105 °C
• Supply Voltage Range - 9 to 30 Vdc (±5 %)
• Reverse Polarity Protection - Yes
• Power Consumption - TBD
• Packaging Dimensions (WxHxD) - 4.8 x 5.1 x 2.8 in 123 x 129 x 72 mm
• Net Dimensions - 0.7 x 3.9 x 4.5 in 17.5 x 99 x 114 mm