PLX31-EIP-SIE ProSoft Technology EtherNet/IP to Siemens Ethernet

The ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™-enabled controllers or devices and Siemens® S7 PACs, including S7-200s, S7-300s, S7-400s, S7-1200 and S7-1500 PACs.

In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.

Features and Benefits
- Data prioritization: Multiple I/O connections allow you to set RPIs for status and/or control data, optimizing Ethernet bandwidth.
- Includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.
- Includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
- ProSoft Discovery Service: This utility allows your PC to see the gateway and change its default IP address without being on the same subnet.
-Secure module configuration via module switch (v1.04 and greater).
-Up to 4000 16-bit registers can be used to exchange large amounts of data.

• Specifications
• Power Supply - 24 VDC nominal 18 to 32 VDC allowed Positive, Negative, GND Terminals
• Current Load - 24 VDC nominal @ 300 mA,10 to 36 VDC @ 610 mA maximum
• Operating Temperature :: -25°C to 70°C (-13°F to 158°F)
• Storage Temperature :: -40°C to 80°C (-40°F to 176°F)
• Relative Humidity - 5% to 95% RH with no condensation
• Dimensions - 5.38 x 1.99 x 4.38 in, 13.67 x 5.05 x 11.13 cm
• LED Indicators -Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP™ Class I or Class III Connection Status (EtherNet/IP Only) Module Status (MS), Module Configuration Status (EtherNet/IP Only) Ethernet Communication Port Link/Activity, and 100 mbit
• Vibration - IEC 60068-2-6; 5G @ 10 to 150 Hz