PLX82-MBTCP-PNC ProSoft Technology TCP/IP to PROFINET Controller

The EtherNet/IP™ to PROFINET Controller Gateway allows you to connect two giants of industrial automation through secure, high-speed communications. The gateway provides EtherNet/IP-based controllers the ability to control up to 36 PROFINET RT devices such as field I/O, drives, HMIs, and controllers.

The PLX82-EIP-PNC gateways are stand-alone DIN-rail mounted units that provide two Ethernet ports for communications, remote configuration, and diagnostics. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup.

Features and Benefits
-Isolated Ethernet ports allow devices on different protocols to be on different subnets
- PROFINET v2 certification with PROFINET class A compliance
-Field-tested with multiple PROFINET devices from multiple vendors
-Remotely view and diagnose Modbus TCP/IP and PROFINET networks

• Specifications
• Supported Modbus Function Codes
• 1: Read Coil Status
• 2: Read Input Status
• 3: Read Holding Registers
• 4: Read Input Registers
• 5: Force (Write) Single Coil
• 6: Preset (Write) Single Holding Register
• 15: Force (Write) Multiple Coils
• 16: Preset (Write) Multiple Holding Registers
• 22: Mask Write Holding Register (Slave Only)
• 23: Read/Write Holding Registers (Slave Only)
• Supported Clients - 10
• Supported Servers - MBAP: 5 Encapsulated: 5
• Command List - Up to 160 fully configurable Client commands
• Status Data - Error codes reported individually for each command
• Command List Polling - Each command can be individually enabled or disabled; write-only-on-data-change is available