PTQ-DNPQ ProSoft Technology DNP 3.0 Master/Slave Interface Module

The DNP 3.0 Master/Slave Network Interface Module with Quality Flag is a single slot, backplane compatible DNP 3.0 interface solution for the Schneider Electric Quantum or Unity platform. This module provides highly configurable support of both DNP 3.0 Master and Slave implementations. The addition of the Quality Flag helps to insure data reliability for critical or time sensitive communications.

Features and Benefits
-The module supports DNP Subset Level 2 features and some of the Level 3 features allowing the many SCADA and field devices supporting the DNP protocol to be integrated into the Quantum or Unity platform. The module acts as an input/output module between the DNP network and the Modicon backplane. The data transfer from the Quantum or Unity processor is asynchronous from the actions on the DNP network. Databases are user defined and stored in the module to hold the data required by the protocol.

• Specifications
• Backplane Current Load - 5 VDC ± 5%, 1100 mA, maximum
• Operating Temperature - 32° F to 140° F (0° C to 60° C)
• Storage Temperature :: -40° F to 185° F (-40° C to 85° C)
• Relative Humidity - 5% to 95% (without condensation)
• Vibration - Sine vibration 4 to 100 Hz in each of the 3 orthogonal axes
• Shock - 30 g, 11 ms in each of the 3 orthogonal axes
• LED Indicators - Module Status, Backplan, Transfer Status, Serial Port Activity, Serial Port Error Status
• Configuration Serial Port (PRT1) - DB-9M PC Compatible, RS-232 only, No hardware handshaking
• Application Serial Ports - DB-9M PC Compatible, RS-232/422/485 jumper selectable, RS-422/485 screw termination included, RS-232 handshaking configurable, 500 V Optical isolation from backplane